Видео

@@alexthehandyman3494 unless I develop a leak, I will try to replace whatever fails myself first. Compressor, evaporator coil, might as well. That’s what eBay is for. I love both of these units. I got my 608 universal last year and bought 30# of r22 just in case…….

Thanks for watching. I kind of did this just for fun. I realized at the end of last season I had a slow leak in one of the cores I think the high side. So I got some new high quality caps, and some nylog and it was holding fine. But I just wanted to see if I could replace the stem……

@@alexthehandyman3494 thanks. There are a lot of similar ones. I changed a pump in my other sterilizer made by a company that supplies pumps for espresso machines. It cost $40 directly but it would take 2 weeks to arrive from Canada so I had to spend $130 and buy it from a dental supplier. Crazy.

house probably settled. If it were my house if the old one rubbed I would expect a new one to rub also. playing with and adjusting the frame isn't Really part of the install in my opinion

@@zingodingo2816 honestly, I’m not exactly sure, it traps anything and everything Last year I walked by and there was a live praying mantis inside trying to get out. I actually broke the plastic to let it out because I like those.

I'm surprised that you find the Cavitron more comfortable than hand scaling (with a scaler-which is what your current hygienist is doing). Usually hand scaling is more gentle. FYI they both work equally. In theory what you suggested would be fine but in practice I would bet that neither dentist allows you to do that. I know I wouldn't. Why? Because Unfortunately treating people isn't like if Im a contractor and will install a toilet you bought at home depot. I have a legal responsibility once you are "my" patient. What if 3 crowns I do fails because you have periodontal disease. the other dentist says "I wouldn't have done crowns with gums in that condition" and you just paid me 15k and now the crowns have to be removed? Dentist who did the crowns says "I'm not responsible for his hygiene, I just do the treatment" now you're in the middle. Maybe not the best example but it's 430am here and my brain isn't up yet. I think neither dentist will want to get involved with someone just coming in for treatment.

yes. It's an in-ground pump. Those things are made to run 24/7. It's only used for an hour or so a week when I'm vacuuming the pool. So I'm expecting it to last forever.

@@andredowner6932 I'm sure she had no idea I was recording cause it was an afterthought a my cellphone

oh I'm sorry I didn't see your comment until now. I'll try it and let you know

yes, I did. I'm not too sure it helps though! When I moved into my house I installed a hydronic heater in the garage so I wanted to limit the amount of air leaks and insulate the doors as well as I could. I placed a thin piece of insulating foam in each "square" of the door, (maybe R5) and went over the top with that foil bubble stuff you noticed. I used an electric staple gun and threw a bunch of staples to keep it in place. Thanks for noticing. It seems to work.

Thank you for the kind words. It's now been three years since my dishwasher flood and the tile has not had any issues at all.

@@Samlol23_drrich that’s awesome to hear. I don’t need it to last a lifetime but my fiancé and I are getting married in February and I felt so defeated having to think about another major expense right now. People like you who post and provide experiences are some real heroes 😂

@@kaitlin4u best of luck to you and the future hubby. Believe me, I’ve gotten so much out of the videos people post on RUclips; as much as I’ve given. I was able to service my own oil burner, central air units, do the brakes and a compressor swap in my car, the list goes on and on. I truly hope the floor goes well for you, . Just be really REALLY careful with the muriatic acid if you’ve never used it. Outdoors only, chemical resistant gloves and a respirator. And I’m not into safety precautions as a rule but it’s that strong.

@@Aruna0915 One side or both of them touching?

@@LynnWatkinsPhoto I suggest trying to put the knob on without the washer or spring. Is it a speed queen? I'm almost sure there is no Spring on the post. Now if the timer came apart, that's a different story. You might have to unplug it, and take the whole timer out and replace or fix it.

@@LynnWatkinsPhoto I just walked over to my dryer. No washer. No spring. Just pulls off.

@@Samlol23_drrich the timer works I just have to put knob on post enough to turn each time. 🤷‍♀️ Thank you for replying.

@@LynnWatkinsPhoto NP this is how most dryer knobs are. It's the same as mine. Not sure why yours wasn't sitting all the way down.ruclips.net/video/eX_NY8mOu7g/видео.htmlsi=RoSHJtCoy4aPFWd2

@@Samlol23_drrich yes Speed Queen. Thanks

@@pieterjansenvanrensburg4648 thanks for watching and sharing your expertise. Interesting with the nail polish.

@@mindaugasv85 I take it you have experience with this wire stripper? Which one do you prefer? I haven't had any problems yet with it.

Did you see me take out of the box those parts in the video? I don't remember anything like that and I'm wondering if my bike had those parts

@@caradaotica if you are really interested I’ll test it when I get home tonight but it absolutely shouldn’t since it’s recording right onto the same file as the video.

This is a 4 year old video. There was no such thing as usb-c or mini DisplayPort when this video was made. So no, it was tb3 and tb2

Mini dp and USB-c has been around since before video

@@SI-oq4qs ​@SI-oq4qs maybe but not on my macbook pro. I would assume you know USB-C is the shape of the connector. My new Mac has TB3.

​@@sezwo5774 I just saw it and answered your question in the other video. You can see the forester at some point sitting in the driveway in this video at 11:24 And for what it's worth in my new WRX, I switched over to 5W30 after my first oil change.

Good luck. If I could be of any help feel free to ask here and I'll try to answer

Very much appreciated! Thanks for taking the time to write and hope it helps

@@Ydoit what are you looking to do? Reprogram the sensor? I think it can only reprogram Autel sensors but it will read and turn off the light in most cars as I understand it.

@@Samlol23_drrich i have a 2010 rav4 and bought 2020 wheels with its oem sensor. Trying to get the car to work with new sensors.

​@@Ydoitso I'm looking at the maxitpms as I'm typing this. There are a lot of rav4s. It looks like the 2010 car has 315mhz sensors so as long as the tires and wheel you bought also have 315mhz you should be good. But there are a lot of 2020 choices. Here's what it says. There are 4 types of possible wheels in 2020. EOOO, CO15, TRW are all 315mhz and will work. If the wheels you bought are XA50 (whatever that means)/those operate at 433mhz and probably won't work in a 2010 no matter what reset tool you have cause they didn't use that frequency in 2010 if that makes sense. Good luck. Otherwise it will work with any of the 315mhz sensors and your 10 rav4

this is The video that shows how to repair the noise that I showed in the first video. My wife had no idea I was working on the washer. She is the least nagging person in this world. I'm extremely lucky.

I guess you are right. I figured that anyone with $500 to waste on a heated toilet seat with a bidet would waste $800 without too much thought as to price.

@@Samlol23_drrich I guess it depends on what differences were coming with that $300. In this case, it truly sounds like nothing more than a slightly better remote control? In any case now that I've looked into them, the S550e is off the table anyway because it only comes in 'elongated' form, not 'round' which is what our toilets are.

​@Sudz28 Well if you are looking to buy one, they no longer make the 550e so search around so you don't wind up with a discontinued model unless that is what you want. The 550 had unlimited hot water (no reservoir) as well as the design was more like an actual toilet seat. It was sleeker and lower which was appealing to me so it wasn't just the remote.

@@Samlol23_drrich Thanks, it actually looks like Toto only has the following current models in a 'round' offering (vice elongated): C2, C200, C5, S300e, and S350e. Maybe I just need to look at the Bio Bidet BB2000, it seems comparable to those but cheaper.

@@Sudz28 all of the toilets in my current house are elongated so fortunately I didn't have to deal with it. Im sure they are all similar. Someone commented on this video that he has installed a lot of Toto bidet seats and they all move left and right (wiggle slightly) even if the bracket is very tight, and that is true. It's annoying. Maybe you will have better luck with a different brand. Good luck!

Really great idea/ suggestion. Maybe next time around (there WILL unfortunately be a next time) I’ll drill out the rivet and replace it with some sort of bolt and nut since I don’t have a riveter (not even sure that’s a word). Thanks for commenting - very small audience for this type of video……

By the way, thanks to you I’m gonna buy a rivet gun. Not bad to have since I’ve got almost everything else.

You can put the air handler in an attic or basement. I've never seen one in a crawl space but you should ask someone in the field. I'm not. Sorry.

How could I not “heart” your comment? Thanks for letting me know and glad it’s working. I’ve got 3 extra switches in my drawer- never even needed the one. But when I do……

@@Samlol23_drrich was like watching mystery documentary ;). Every step you took is exactly the path i was going to head but did not know where everything was located. I was so glad to see the ending . The switch which i did not know was even there made perfect sense as the igniter was fine when the back burner was igniting. But when I used the front burner knob the igniter was intermittent. I was scratching my head as to how it could be knob specific unless it was the module which I also did not know the location. Great video

@@tcorker11 I was as surprised as anyone to see there were microswitches behind the front panel. I usually kick myself that I didn’t make a video after the fact- this time I decided to let the camera record as I was trying to figure it out. There are certain things the “pros” don’t make videos showing us laypeople how to fix, and this Wolf range was one of them. That’s why as a non expert I decided to put the video out there. I got lucky and it worked. Thanks again for commenting.

Thank you as well for leaving a comment. It's very much appreciated

Well, one of us is wrong about the seat heater fuse, and I don’t think it’s me. Just went over to my car and you can’t even access the seat heaters with the car off, it’s part of the infotainment system. The seat heats go off and only work when the car is running so if your dashcam runs in park mode, it’s not hooked up to the seat heater fuse unless that’s the fuse you used for the running mode. The off mode fuses are things like the horn and brake lights and interior lights that work when the ignition is off. I have 2 Lukas black box dashcams and one 2 channel black view in my other 3 cars. They all use the car battery in park mode and like you I only get a couple of hours and once a car didn’t start because of the battery being over drained. The dedicated battery is great. I get at least 8 hours but not too much more. I really don’t need more, and if I chose a mode that recorded less I could probably get more. It’s worth the money considering car batteries are really expensive now.

I’m no expert but I did use a multimeter to test all the fuses with the car off and for some strange reason the 20 amp seat heater fuse has power! I just ran out to the car and pulled the taps and retested, seat heater has power with the vehicle off and ACC (2nd down from the top right) does not. There’s a video floating around on RUclips of a guy installing a hardwire kit in a 2022 WRX and he also tests the fuses.

@@cansol7183 okay, honestly I didn’t test them, if you did and it’s working I’d assume that it has power. However, I then can’t explain why when I turn my car off the dashcam says “switching to parking mode” that relies on there being no power to the unit. And if the fuse was powered all the time that wouldn’t happen in this particular dashcam. But the battery backup is worth the cost.

Honestly wiped up everything I could see or feel and whatever left was under the tile so I’m not sure. It’s still holding in my case. Sorry it didn’t seem to dry.

Ok lets See how it goes. I guess it must dry at some point

Mine isn't faint

Do you have the service manual? I've never even read anything that sounds like that

Thanks for commenting!

Thanks for commenting. Yeah, they’ve definitely been great so far. No issues at all.

No, they are two different faults. IO is “igniter open circuit” and IF is “ignition fault”. Here’s their service manual. See page .32 www.haywardnet.com/pdfs/uhs-heater-troubleshooting-guide.pdf. But thanks for commenting and watching.

@@Samlol23_drrich well mine first read SF then IF we changed the ignite n still not heating up

@lindalisten1516 did you have the service manual I linked above? If not download and follow the flow chart. It's great

Thank you for a really nice comment. They do make a dongle that will work over wifi, however both the mini and your primary unit need to be on the same network. It didn’t work because of the layout of my house, but it might work for your home. I’ve gotten a few comments from people that have used the wifi successfully. Thank you again for the nice comment.